Elevate your outdoor or indoor spaces with stunning textures and patterns from our premium concrete stamps—where quality meets creativity. Contact us today to explore the perfect style for your project!

Elevate your outdoor or indoor spaces with stunning textures and patterns from our premium concrete stamps—where quality meets creativity. Contact us today to explore the perfect style for your project!

Elevate your outdoor or indoor spaces with stunning textures and patterns from our premium concrete stamps—where quality meets creativity. Contact us today to explore the perfect style for your project!

Elevate your outdoor or indoor spaces with stunning textures and patterns from our premium concrete stamps—where quality meets creativity. Contact us today to explore the perfect style for your project!

Elevate your outdoor or indoor spaces with stunning textures and patterns from our premium concrete stamps—where quality meets creativity. Contact us today to explore the perfect style for your project!

• Clear High Gloss for most types of concrete

• Brown for exposed pea gravel

• Gray for exposed chip limestone

• 30% Styrene Acrylic Sealer/Curing Aid

• Solvent-based Concrete Cure and Seal

• Non-yellowing

• Great for exposed aggregate and most types of concrete

• Wet look enhances color on decorative concrete

• Not for cured broom finished concrete

• ASTM 1315 and 309

• <700 g/l VOC meets US EPA standards

• Available in 1-gallon cans, 5-gallon pails, & 55-gallon drums

Resources

• Technical Data Sheet

• Safety Data Sheet

• VOC Regulations

• Brochure

The material has a low density, allowing it to remain suspended in low-viscosity systems. The rounded particle shape provides easier cleaning and a more pleasant feel on bare feet, which makes this product ideal for pool decks and patios. It is available in course and fine depending on application.

• 8 ounce bottle mixes with 1 gallon of sealer

• 1 quart bottle mixes with 5 gallons of sealer

Resources

• Technical Data Sheet

• Color and texture is same as most exposed aggregate concrete

• Quart bottle is easy to use

• Shake well

• Snip the top to desired width and fill crack.

• Allow to dry

• Seal concrete for long lasting results

• Brown river sand matches washed pea gravel concrete.

Resources

• Technical Data Sheet

• Safety Data Sheet

Brickform uses the highest quality UV-resistant pigment, sand, and fine aggregates to manufacture their Color Hardener. Perfect for stamped concrete and trowel finishes, concrete Color Hardener produces consistent and brilliant color while standing up to abrasion, weather, and normal wear.

Brickform Liquid Release is a colorless release agent formulated and recommended for use with Brickform texture mats or concrete stamping tools. Liquid Release for stamped concrete forms a barrier that prevents imprinting tools from sticking to the concrete surface during the stamping process. It is commonly used on interior applications in place of powdered release or where final projects require topical stains or coatings.

Brickform Stealth-Seal WB is a water-based Silane/Siloxane sealer that effectively protects and preserves the natural appearance of any surface with a no-gloss finish. It works by creating an invisible barrier at the surface level through a chemical reaction between the sealer and the cement paste. Stealth Seal WB protects against freeze-thaw cycles, oil, water and salt intrusion to porous construction materials such as concrete, bricks, stone, masonry blocks, and mortar.

Select-Etch by Brickform is a concrete surface retarder that makes exposed aggregate finishes easier and more consistent. It is topically applied to freshly-placed concrete to prevent cement paste hardening and achieve more controlled exposed aggregate finishes. Unlike sugar-based retarders with uncertain levels of retardation, Select-Etch selectively slows the hydration process down to a controlled depth.

Twelve predetermined depths of exposure are available, color-coded for identification, to provide consistent, repeatable cement paste removal and aggregate reveal. Because Select-Etch provides a longer window before the surface paste must be removed, it allows underlying concrete to harden properly, locking in aggregate and reducing pop-outs. Select-Etch is water-soluble for easy removal with high-pressure water washing and scrubbing equipment.

Select-Etch creates a polymeric film that acts as a water retention barrier and temporary curing agent, protecting fresh concrete from light rain and reducing moisture loss.

ARTesian stains are penetrating, water-based concrete stains that produce unique color effects in finished cementitious surfaces, simulating the natural shadings and aged appearance of stone or masonry. ARTesian stain may be applied over smooth troweled or textured concrete, cement-based overlayments, vertical or horizontal concrete and masonry surfaces, artificial rock displays, water features and themed finishes.

Brickform Neutral Clean is a cleaning and neutralizing agent engineered for use on acid and reactive stained floors prior to sealing and to remove light oil, grease or other types of soils from colored, imprinted and natural concrete surfaces. This product combines cleaning and light degreasing without the use of petroleum solvents and effectively loosens residues from the staining process, as well as loosening release powders from stamped concrete.

Elevate your outdoor or indoor spaces with stunning textures and patterns from our premium concrete stamps—where quality meets creativity. Contact us today to explore the perfect style for your project!

Elevate your outdoor or indoor spaces with stunning textures and patterns from our premium concrete stamps—where quality meets creativity. Contact us today to explore the perfect style for your project!

Elevate your outdoor or indoor spaces with stunning textures and patterns from our premium concrete stamps—where quality meets creativity. Contact us today to explore the perfect style for your project!

Elevate your outdoor or indoor spaces with stunning textures and patterns from our premium concrete stamps—where quality meets creativity. Contact us today to explore the perfect style for your project!

Elevate your outdoor or indoor spaces with stunning textures and patterns from our premium concrete stamps—where quality meets creativity. Contact us today to explore the perfect style for your project!

• High Gloss Finish

• 25% Pure Acrylic Sealer

• Solvent-based concrete sealer

• Non-Yellowing

• Great for all types of cured concrete

• Wet look enhances color on decorative concrete

• <700 g/l VOC meets US EPA standards

• Available in 1-gallon cans, 5-gallon pails, & 55-gallon drums

Resources

• Technical Data Sheet

• Safety Data Sheet

• VOC Regulations

• Brochure

• Re-melts solvent-based sealer

• Melts bubbles dried in acrylic sealer

• Cuts through old sealers

• Clean tools

• Release moisture from acrylic films

• Cuts through film build up

• Hot solvent acts fast

• Packaged in 1-gallon cans & 5-gallon pails

Resources

• Technical Data Sheet

• Safety Data Sheet

Brickform DAY1 is a colloidal silica-based finishing aid that makes concrete flatwork finishing easier and faster. It produces a better result and reduces the risk of a prematurely setting slab. Applied during floating and troweling, DAY1 finishing aid increases cream and extends workability under adverse conditions such as high wind, heat, or low humidity. It eliminates the need to add water to the surface which can lead to premature surface failure. DAY1 does not alter the water-to-cement ratio and becomes a permanent part of the slab so there is no membrane or residue to remove.

Stamp concrete without pouring a new slab. Stampable Overlay is applied over existing, structurally sound concrete, stamped using Brickform textures marked “S/O”, and allowed to cure. This makes it possible to install stamped concrete where it is not feasible or desirable to pour new concrete. Stampable Overlay comes in two varieties: SC-60 is a white or gray mix colored with Overlay Liquid Colorant while OL-60 is a gray mix compatible with Color Hardener.

Brickform SM Pro is a sprayable cementitious overlay designed to be applied with a hopper gun. It can be integrally colored using Brickform Overlay Liquid Colorant. It is available as a one-part, add-water-only formulation or as a two-part, add-polymer formulation. Brickform SM Pro can be used to create the look of brick, stone, tile or other unique specialty finishes.

Gem Cure & Seal WB is a water-based acrylic curing and sealing compound for freshly placed concrete or existing concrete surfaces. Gem Cure & Seal WB minimizes moisture loss in newly placed concrete to provide maximum strength, hardness, and protection. Reducing water evaporation will result in a stronger, denser, more durable concrete with higher compressive strength and better crack and freeze-thaw resistance.

Brickform Antique Release is a hydrophobic powder that imparts color while serving as a bond breaker for stamping. It is made from a finely ground formula that creates beautifully antiqued concrete surfaces. During the stamping process, Antique Release is pressed into the concrete surface, creating a secondary coloring effect once washed off and sealed.

Brickform Blush-Tone Acid Stain reacts with minerals that exist in newly cured or existing concrete. It penetrates the very top layer of the concrete with color that will not chip, crack, or peel. The colors produced by concrete acid stain are unique in each section with captivating, multi-colored intensities that become a permanent part of the concrete. Brickform Blush-Tone Acid Stain is available in 10 standard colors.

Brickform E-Etch is an environmentally friendly industrial strength floor cleaner, degreaser and light etching product. It is ideal for cleaning and preparing cementitious surfaces for acid staining, decorative overlays, water-based stains, and coatings applications. It may also be used on concrete, stucco, terrazzo and most masonry surfaces to open up the pores on the surface and clean grime, dirt, grease, scuff marks and stains. E-Etch effectively removes excess Antique Release from textured concrete and can also be used as an efflorescence remover.

Elevate your outdoor or indoor spaces with stunning textures and patterns from our premium concrete stamps—where quality meets creativity. Contact us today to explore the perfect style for your project!

Elevate your outdoor or indoor spaces with stunning textures and patterns from our premium concrete stamps—where quality meets creativity. Contact us today to explore the perfect style for your project!

Elevate your outdoor or indoor spaces with stunning textures and patterns from our premium concrete stamps—where quality meets creativity. Contact us today to explore the perfect style for your project!

Elevate your outdoor or indoor spaces with stunning textures and patterns from our premium concrete stamps—where quality meets creativity. Contact us today to explore the perfect style for your project!

Brickform Poly-Seal is a solvent-based acrylic sealer designed to protect concrete and masonry surfaces. Poly-Seal is specifically formulated for use on colored, stained, stamped and exposed aggregate concrete but can also be used on all exterior concrete surfaces.

• High Gloss

• 25% Styrene Acrylic Sealer/Curing Aid

• Solvent-based concrete cure and seal

• Non-yellowing with added UV stabilizers

• Great for all types of cured concrete

• Wet look enhances color on decorative concrete

• ASTM 1315 and 309

• <700 g/l VOC meets US EPA standards

• Available in 1-gallon cans, 5-gallon pails, & 55-gallon drums. High Gloss and Matte

Resources

• Technical Data Sheet

• Safety Data Sheet

• VOC Regulations

• Brochure

Our MATTE ADDITIVE is a non-hazardous additive that will convert a high gloss, solvent-based acrylic sealer to a matte finish sealer.  The material has a low density, allowing it to remain suspended in low-viscosity systems.

Resources

• Technical Data Sheet

• Brochure

Brickform Antique Release is a hydrophobic powder that imparts color while serving as a bond breaker for stamping. It is made from a finely ground formula that creates beautifully antiqued concrete surfaces. During the stamping process, Antique Release is pressed into the concrete surface, creating a secondary coloring effect once washed off and sealed.

• Sprayable surface retarder designed to create a variable etch exposed finish by retarding the hydration of the cement on the surface of a concrete placement.

• Super Cast is conveniently formulated in various colors coordinated with the desired depth of exposure.

Resources

• Technical Data Sheet

• Safety Data Sheet 003, 005, 015

• Safety Data Sheet 050, 100, 125

• VOC Regulations

• Brochure

Brickform Triple Seven Bond Coat prevents the concrete from absorbing water from the overlay material, making it easier to spread and achieve a smooth surface. Triple Seven Bond Coat is a reactive primer, remaining active for at least two hours after it is applied. Triple Seven Bond Coat increases the bond strength by creating a more efficient chemical link between the concrete and the overlay.

Brickform Gem-Guard is a penetrating, solvent-based Silane/Siloxane sealer designed for decorative concrete and concrete pavers. Applying Gem-Guard SB will enhance the color and provide a low sheen without adding the gloss and plastic look associated with traditional film forming sealers. Once treated, the sealer protects against stains, water and salt intrusion.

Antique-It is a water-soluble antiquing agent designed to impart a secondary color or to highlight stamped concrete or textured overlays. Antique-It is easy to apply, dries fast, and provides a durable color that closely resembles the look of antique release powder. Use Antique-It on newly placed hardened concrete or to rejuvenate old stamped concrete.

Brickform Strip-It is an environmentally sound and user-safe stripper for water and solvent-based sealers and paints. Strip-It may be used on all masonry surfaces including concrete, quarry tile, ceramic tile, terrazzo, cementitious overlays and other surfaces. Strip-It meets 2005 California Air Resources Board VOC standards (less than 50% VOC by weight).